Updating the electrical wiring in your home is like giving it a superhero cape, greatly increasing its defense against potential dangers.
It usually involves replacing old wiring with new, more modern wiring that will work in a variety of environments.
Homeowners often hire a reliable electrical company for this type of job, but it can also be done by those who are handy and knowledgeable about electrical systems.
If you’re thinking about doing it yourself, make sure you follow these tips to keep yourself safe while working on your home’s wiring system.
Turn Off The Electrical Power
The first thing you must never forget when you plan to rewire a room in your house or perhaps the entire household is to turn off the power to that area.
This means you will need a circuit breaker or fuse box with an on/off switch and then shut down electricity at your home’s main service panel in order for it to be completely safe.
Also, when turning off your electrical power be sure that you check all the outlets to guarantee they are completely off before proceeding.
When you turn on your power, be careful not to touch any live parts with your fingers—that includes wires, screws, etc., in order to avoid electrocuting yourself.
If you fail to follow this tip, not only will you risk your life, but you might end up with a hefty electric bill as well.
Pick a Strong Wiring System
Your wiring system is what helps distribute electricity to all the electrical outlets and appliances in your home.
It is important that you pick a system of wiring strong enough for heavy use, as well as one that is compatible with how many people are using it at any given time.
For example, if only a few people will be using the wiring system while it’s being installed then it’s good to go for a smaller, more basic system. But if you plan to install the wiring when your home is completely finished and there will be many people living in it at one time then a larger wire system would be best suited for that situation.
There are actually many types of wiring systems available in the market. Some of these are copper, aluminum steel, and of course plastic. Copper is the best for your home, as it can carry more power and resist corrosion better than any other type of wiring material on the market today.
Properly Remove All Old Wires
One mistake homeowners who are doing their own rewiring tend to do is that they leave the old wires in place. This can be dangerous as it may cause an electric shock or even worse, a fire.
In addition to this, when you’re working with new wiring installation then there is nothing holding onto those older cables and that could lead them to get all tangled up together which would make things much harder for you down the road.
If you don’t want to make your life complicated and of course, save yourself from paying thousands of ringgits for repairs, then you should make sure you remove the old wires.
Some professional rewiring companies will do this for you but if not, then it’s your responsibility to have done so before starting any work and call them in after that.
Be Sure to Have an Electrical Plan
You can execute a successful rewiring project if you don’t have a proper electrical plan. It will be difficult if you’re not sure of the type and placement for all your fixtures or appliances.
Before you begin, be sure you list down everything that needs to be done as well as the tools, equipment, and materials you will need.
You should consult an engineer before going any further to be sure that the plan is a good one and adheres to all safety codes in your area.
You can also make use of various free wiring plans available online or from local electricians who offer this service at affordable rates.
Final Words
The tips we’ve provided can help you to stay safe at home. However, if you are ever faced with an emergency situation, call help immediately!
If these strategies seem daunting or overwhelming, and you want a helping hand with your family safety plan, contact us today for more information about our custom-built security systems or professional installation services.
We offer full in-home consultation free of charge so that we may assess the needs of your property and create a personalized solution tailored just for your unique space.
